Arke K33024 Guide d'installation télécharger pdf (Page 6)

7 - kr

After you have nished assembling the staircase,

please visit our website and send us your suggestions: www.arke.ws

17. The rst balusters (C12) of the long side of every tread (L40) have to be cut.

18. Tighten the part C28 completely, by using the part B02 (g. 1). For a correct assembly twist the

key at about 90° from the contact point.

Final Assembly

19. Control the vertical line of the whole stair and, if necessary, correct it by moving the support N16

(g. 1).

20. Disassemble the rst tread (L40) and drill the oor with a Ø 14 mm tip in relation to the present

holes on the support N16 (g. 1).

21. Insert the parts C39 and tighten completely (g. 1).

22. Reassemble the rst tread (L40) and x on the oor, in relation to the rst baluster (C12), the part

F01, by drilling with a Ø 8 mm tip. Use the parts B11, B12, B83 and B02 (g. 1).

23. Insert the baluster (C12) and tighten the part B02 (g. 1).

1 2 3 4 5 6 7 8 9 10 11 ... 64 65

Pas de commentaire

Arke K33024 Guide d'installation Page 6